VITCAS Black Fire Cement is a finely ground putty-like material which is resistant to high temperatures.
Uses
Preparation
For maximum adhesion, remove all dirt, dust and rust, and make sure the area is thoroughly clean.
Application
Premium Fire Cement should be used straight from tub. Apply with a trowel, knife or hand and work well into the area. Fine joints can be made. As soon as possible, gently heat dry the repaired surfaces, gradually raising the heat to full operating temperature over 3-4 hours. Apply further cement to any fine cracks which may appear.
Storage
Keep any unused material dry and store in a cool dry place away from children and pets. In case of contact with skin and eyes rinse immediately with plenty of water and seek medical advice. After contact with skin, wash with water. Wear suitable gloves and eye face protection. Keep out of reach of children.
Disclaimer
The information given is based on our experience and reports from customers. There are many factors outside our control and knowledge, especially the method and conditions of application which affect the use and performance of our products and for which reason no warranty is given, expressed or implied. Users should make their own tests to determine the applicability of such information or the suitability of any products for their own particular purposes.
Technical
Consistency: Putty
Colour: Black
Max Service Temperature: 1250oC (2282oF)
Working Time: at least 2 hours
Curing Time: 12 hours at 20oC but this is reduced when heat is applied.
Limitations:
Not for use in prolonged contact with water – use Heatproof Screed or Outdoor Oven Cement for external applications
Not for use as a mortar
Not for use as a render